Verfasste Forenbeiträge

Ansicht von 3 Beiträgen - 1 bis 3 (von insgesamt 3)
  • Autor
  • shodan

    Thanks for the reply

    I notice my photo did not go through due to the 512kb image limit
    I have reduced the image quality further so you can have an idea of my setup.

    So, as per the second screenshot, you can see my screen layout

    Screen 1 is physically attached to my spacedesk server PC

    Screen 2 and 5 are android devices with hdmi output running spacedesk viewer for android, these work no problem, except they do not go to sleep when the server PC does, but that is only minor annoyance (it does say „power save mode“ but the screen does not sleep)

    Screen 3 and 4 are both connected to another windows PC, they are screen 1 and 2 on that PC.

    So I have two instances of spacedesk viewer running on that PC.
    This might be the reason why they come out of fullscreen occasionnally ?

    When I have to restart my entire system, I have to start two copies of spacedesk viewer, that is the problem.

    Are there command line parameters for starting spacedeskviewer ?
    The problem is that when I start two copies of spacedeskviewer, they both start on the same (screen 1) and I have to move them manually.

    I would like a command line parameter when I can say client id {AAAAA-BBBBBBBB} start fullscreen on screen 1 and cliend id {CCCCCCCCC-DDDDDDDDD} start on screen 2

    Also please note that the client come out of fullscreen only on the windows PC running spacedeskviewer, this does not happen on the android devices.

    And it is not only going to sleep (which I do not want to disable, I want everything to go to sleep when I am not using it) that causes the spacedesk client to come out of fullscreen but changes in resolution of Screen 1 on the spacedesk server (for instance when an application runs in fullscreen on screen 1, it will switch through other resolution and cause all the screens to flash a little, this is when the out of fullscreen happens)

    This is only a little annoying, because I need to keep an extra mouse handy at all times for the viewer PC.

    Ideally I would have 4 android devices running the four screens but they are currently out of stock 🙁
    Other than that pretty happy with everything to do with spacedesk

    I do have one other recommendation to make, currently spacedesk client only accept a IP address, but I would like to use a hostname my PC is called hadron.lan, its IP address changes occasionally but it is always reachable by the hostname „hadron.lan“ so access via hostname instead of IP address would be more rliable

    You must be logged in to view attached files.
    als Antwort auf: Enquiry about the Display Driver SDK for Windows license #6397

    Yeah, what is the price ? I would like to purchase the SDK to give to the Sunshine project as they also want to create indirect displays

    als Antwort auf: Raspberry Pi 4 as spacedesk viewer ? #2279

    Thanks, unfortunately it doesn’t work

    Well it does connect, spacedesk creates a new monitor and it shows on my raspberry pi.

    But the performance is as slow and erratic as VNC. And the video quality is also terrible, extremely blurry even for static images and very variable.

    I know the RPi can do this since steamlink and moonlight manage without problems and the response time is excellent (sub 100ms)

    The RPi is the perfect Spacedesk viewer hardware, why is there no linux native spacedesk client ?

    The world is done with windows after windows 11 !

Ansicht von 3 Beiträgen - 1 bis 3 (von insgesamt 3)