So when I first try this app. It worked amazing for the first time, But I lost connection cause I was too far from the router or it lost connection. But I can never get it to re-connected. It can’t even connected to the manual IP address that the Spacedesk DRIVER shows in my PC. How do I connect my Phone to my PC again after first connection failed?
1. Do you VPN enable? If yes, please disable it.
2. Do you have third party firewall or antivirus software on your machine? If yes, please make sure to include spacedeskService (C:\Windows\system32\spacedeskService.exe) in the exception list to allow incoming and outgoing connection.
3. If you are connecting over WiFi network, please check if your WiFi router settings has client/WiFi/AP isolation enabled. If this is enabled, it will prevent direct communication between connected devices/computers.
4. Please also make sure your current network profile is set to Private, via Windows Settings -> Network & Internet.
For more info please check the Troubleshooting -> Network Connection chapter in the user manual https://www.spacedesk.net/user-manual/.
If the suggestions above did not help, could you please send us the diagnostic info in your primary machine.
Just open the spacedesk Driver Console -> Diagnostics, then click the “Save All Information”.
PS: Saving all information will take a few seconds, then please send us the whole folder which contains all the diagnostic logs collected.
Please right-click the folder -> Send to -> Compressed (zipped) folder, then attach the *.zip file in your next reply.