Connection loss(close)delay does not work
Hello.
There is a need to turn off the tablet (sleep) during operation.
It is necessary that the USB connection is not disconnected.
The following points are responsible for this : Connection loss(close)delay, but whatever I specify (-1…..80000) The USB is disconnected after 40-45 seconds. If you disable and enable (USB android cable) in the driver or the driver itself, press OFF and ON, then the connection is restored, although the tablet is asleep.
What can be done about it?
Hi @yvsmirnov79,
please send us the spacedesk diagnostics of this issue.
Open spacedesk Driver Console and go to Diagnostics (please see attached screenshot).
Follow the collection steps and send us the generated (compressed/.zip) folder.
In case the folder size exceeds 512KB, upload it in Dropbox/Google Drive/One Drive/etc. and send us a download link.
- Du musst dich anmelden um auf Uploads zugreifen zu können.
Hello, the diagnosis must be done before disconnecting the USB or After
Hi @yvsmirnov79,
the Diagnostic Collection must be started first (Steps 1 and 2).
Issue should be reproduced in Step 3 – connect by USB and let it disconnect.
When the issue has been reproduced, then move to Step 4, etc.