Request force full screen function 请求强制全屏功能
In some special cases, such as using wm overscan, or when the screen’s actual aspect ratio is inconsistent with the physical resolution (e.g. a 7-inch screen with 1024×600 or 800×600), I would like the image to fill the entire screen, just like using the native resolution. It would also be best to be able to disable the limitation of not being able to set a resolution that exceeds the physical resolution (currently this requires wm size first).
在某些特殊情况下，如使用wm overscan，或是屏幕实际比例与物理分辨率不一致（比如1024×600或是800×600的7寸屏幕）我希望画面可以铺满屏幕，就像使用原生分辨率一样，最好可以允许关闭无法设置超过物理分辨率的分辨率这一限制（现在需要先wm sise后才能设置）
Quote from spacedesk Nicole on 14/10/2025, 07:07Hi @sparkle,
on which spacedesk viewer app did you experience this issue?
android app v2.1.30
Hi @sparkle,
the default resolution set in the spacedesk viewer is the native resolution of the device. Please check in the viewer settings if the desired resolution is selected. After the viewer has connected, also check in Windows display settings if the resolution is correct.
Quote from spacedesk Nicole on 14/10/2025, 09:04Hi @sparkle,
the default resolution set in the spacedesk viewer is the native resolution of the device. Please check in the viewer settings if the desired resolution is selected. After the viewer has connected, also check in Windows display settings if the resolution is correct.
I hope to add a switch to force stretching to full screen
Because for example, a 7-inch screen with 1024×600 has a screen ratio of 16:9, but the resolution is not. You need to set 1066×600 and cover the entire screen to get the correct display ratio.
Or after using wm overscan, the screen will still be scaled down according to the full screen ratio to adjust the image of the area after the overscan, which will cause the display ratio to be wrong.
我希望可以增加强制拉伸到全屏的开关
因为比如1024×600的7寸屏幕，他的屏幕比例是16:9的，但是分辨率并不是，需要设置1066×600并且铺满全屏才能获得正确的显示比例
或是在使用了wm overscan后，屏幕依然会按照全屏的比例缩来调整overscan后的区域的画面，这会导致显示比例错误