[SOLVED] Severe Display Artifacts and Borders After Latest Spacedesk Update (Driver & App)

#11 · 26/01/2026, 11:00

Thank you for sending your logs. The issue has been reproduced on our end and will be fixed in a later release. For the meantime, you can switch your spacedesk Viewer’s Encoding Type to “Software Encoding JPEG (force always)” as a workaround for this issue. This setting can be found in the “Compression” section in the Settings page. Thank you.

#12 · 26/01/2026, 14:15

Hello,

Thanks for your answer, i’m really sorry but i don’t find any parameters page. I make left clik on the icom in systray and open spacedesk driver console, and after that ?

thanks a lot for your help

#13 · 27/01/2026, 02:16

Hi @stephane,

You change the Encoding Type settings on the client side, the device (phone/tablet) that connects to the Primary PC (where the spacedesk Driver is installed). To change it:

1. Open spacedesk app in your phone/tablet
2. Tap the floating menu ☰
3. Tap “Settings” > “Quality/Performance”
4. Tap “Encoding Type” and select “Software Encoding MJPEG (forced)

#14 · 28/01/2026, 06:57

Hi, it s work fine now, thanks a lot

Have a Nice Day

spacedesk Renz has reacted to this post.