[SOLVED] Severe Display Artifacts and Borders After Latest Spacedesk Update (Driver & App)
Hi @stephane,
Thank you for sending your logs. The issue has been reproduced on our end and will be fixed in a later release. For the meantime, you can switch your spacedesk Viewer’s Encoding Type to „Software Encoding JPEG (force always)“ as a workaround for this issue. This setting can be found in the „Compression“ section in the Settings page. Thank you.
Hello,
Thanks for your answer, i’m really sorry but i don’t find any parameters page. I make left clik on the icom in systray and open spacedesk driver console, and after that ?
thanks a lot for your help
Hi @stephane,
You change the Encoding Type settings on the client side, the device (phone/tablet) that connects to the Primary PC (where the spacedesk Driver is installed). To change it:
1. Open spacedesk app in your phone/tablet
2. Tap the floating menu ☰
3. Tap „Settings“ > „Quality/Performance“
4. Tap „Encoding Type“ and select „Software Encoding MJPEG (forced)
Hi, it s work fine now, thanks a lot
Have a Nice Day