Hello spacedesk team,

I believe I may have found a bug related to the Video Wall feature in the current Windows Driver version.

Setup:

• Windows 11 Pro 64-bit
• spacedesk Driver: 2.2.24 (Free Edition)
• iPad Viewer: 2.1.5
• Connection via Wi-Fi (same network)
• One single iPad connected as display client
• Display duplication works correctly

Observed behavior:

1. With Video Wall Mode disabled:
   • The iPad appears under “VIDEOWALL > Unassigned”.
   • Selecting the iPad shows all Video Wall settings (Wall Index, Position, Rotation, Flip, etc.).
   • However, none of these settings are editable. I cannot enter values, change settings, or activate the Flip checkbox.
2. With Video Wall Mode enabled:
   • The Video Wall tree structure disappears.
   • “VideoWall0”, “VideoWall1”, and “Unassigned” are no longer available.
   • Therefore it becomes impossible to assign the iPad to a wall or configure any Video Wall settings.

Expected behavior:

According to the Video Wall documentation, the connected display should remain available under “Unassigned” so it can be assigned to a Video Wall and configured.

Additional information:

• The iPad is detected correctly and receives the duplicated desktop image.
• Network connection is stable.
• The issue occurs consistently after every restart.
• I have already tried enabling/disabling Video Wall Mode multiple times and selecting VideoWall0 directly.

Could you please confirm whether this is a known issue in Driver 2.2.24 or whether there is an additional configuration step required?

Thank you.

• You need to login to have access to uploads.